Vitamin Shower Filter
The Honey Me vitamin C shower filter: removes rust and residual chlorine and adds vitamin C to your shower, in five fragrances.
Overview
The Vitamin Shower Filter screws between the shower hose and the shower head, or at the tap connection. As the water passes through the filter core, it removes rust, sediment and residual chlorine, and adds vitamin C. Each filter core lasts about two months and is available in five fragrances. A standard 21 mm thread fits the valves and taps found in bathrooms.
Key features
Removes rust and sediment
Filters rust and fine dirt out of the shower water.
Removes residual chlorine
Reduces the chlorine that dries skin and hair and irritates sensitive skin. Tested: not detected after filtering.
Adds vitamin C
Vitamin C is released into the shower water to keep skin firm and moisturized.
Benefits of a filtered shower
Skin
Helps prevent dry skin and reduces irritation, keeping skin soft and naturally moisturized.
Hair
Reduces dry, brittle hair so hair stays strong and holds moisture better.
Breathing
Reduces the chlorine that evaporates into the warm air of the bathroom.
Better lather
Without chlorine and impurities, soap and shower gel foam better and rinse cleaner, and skincare products absorb better after the shower.
Who it is for
- Children with sensitive skin
- Older adults concerned about skin aging
- Anyone who cares about the quality of their shower water
- People concerned about fine dust
- Can also be used for pets
Five fragrances
Each filter core has its own colour and fragrance, so you can choose a favourite or change with the seasons.
Full set and single filters
The full set is a ready-to-use gift box. Single filter cores are available for replacement, in any of the five fragrances.
The full set contains
- 1 shower head
- 1 wrench
- 1 Lemon fragrance filter core
- 1 Rose fragrance filter core
Full set weight 700 g.
Easy installation
Two simple ways to install, with the wrench supplied. No other tools are needed.
Install at the shower head
- 1Disconnect the hose from the shower head.
- 2Attach the filter to the shower head.
- 3Connect the hose to the bottom of the filter.
- 4Tighten each connection with the supplied wrench.
Install at the tap connection
- 1Disconnect the hose from the tap with the supplied wrench.
- 2Fit the filter where the hose meets the tap.
- 3Connect the hose to the bottom of the filter.
- 4Tighten each connection with the supplied wrench.
Filter core with 21 mm thread
Specifications
| Product | Vitamin Shower Filter (Honey Me) |
|---|---|
| Fragrances | Lemon, Rose, Lavender, Green grape, Cherry |
| Water temperature | 40 - 50 °C |
| Water pressure | 1 - 7 kgf/cm² |
| Filter weight | 160 g |
| Full set weight | 700 g |
| Replacement cycle | 2 months, based on 120 L of water per day |
| Service life | 45 - 50 days, depending on water quality and use |
| Thread standard | 21 mm, fits the valves and taps found in bathrooms |
| Overall length | 136 mm |
| Length without thread | 116 mm |
| Filter core length | 96 mm |
| Filter core diameter | Ø40 mm |
| Origin | Made in Korea |
Tests and recognition
Tested for effect and skin safety
Residual chlorine removal
Tap water measured 0.19 mg/L residual chlorine. After the vitamin filter the result was “Not detected”.
Independent test, Korea, 2018
Skin patch irritation test
30 adults aged 20 - 60 completed a 24-hour skin patch test assessed by a dermatologist. Irritation index 0.15: no irritation.
Clinical trial center, Korea, 2018
Association recognition
Recognized as an excellent product by the World Atopy Association and by the Korea Fine Dust Preventive Association.
Valid 22 May 2025 - 21 May 2027
Test results apply to the tested samples and conditions. Test reports and certificates are available on request.
OEM manufacturing
Your brand on the box and the label
The Vitamin Shower Filter is available as an OEM product. We make it with the box design and the label logo of your own brand, so the product reaches your customer as your own.
Your box design
Outer package and small box made to your own design.
Label with your logo
The filter label carries your brand logo and artwork.
Made to order
Tell us the fragrances and your brand, and we will prepare a proposal for you.
Need samples, specifications or a quotation?
Contact Mr. Jin-Hye Jeong (Tristan), Head Director.
Contact Now